Concentrated Beam of Green Dot Laser Alignment

In a large variety of industrial precise machinery processing work fields, it is always quite wonderful work for users to make dot measurement with a correct dot alignment tool. Instead of the use of formally used laser pointer or a sticker, according to the easy use of high brightness green dot laser alignment, only according to quite easy connect with an external electric power source of DC input power supply with correct operating voltage, this green laser module is easily getting highly bright and visible green reference dot in distance. Anytime this laser dot alignment tool is making proper adjustment of laser beam focus and dot targeting direction, users are just able to get a quite accurate and high speed laser dot instruction on various working surfaces effectively.

Green Dot Laser Alignment

The real use of green dot laser alignment is quite similar with a green laser pointer. However, in order to constant dot positioning result, formal alkaline battery is just getting technical innovation with a DC input power supply. The whole process of laser dot alignment work has no need to spend extra time on battery change. On contrary, according to the use of electric power source, the whole process of laser dot alignment is just supporting long term use. In order to maintain its stable enough dot measuring work, usually green laser module is supporting daily operating time of 8 to 10 hours a day, and then cooling down.
Only if green dot laser alignment gets enough time for laser tube cooling down, it can easily obtain good protection of infrared laser diode and electric driving circuit board from burning out, and then obtaining extremely long serving lifetime of more than 8000 hours. Within its quite wide output power range of 5mW to 100mW, although green reference dot targeting is processed at quite longer work distance, however, it is still not affected, but still keeping clear and quick enough dot alignment in distance. In practical dot measuring work, this green laser module is keeping super low laser beam divergence of no more than 1mard, thus green alignment laser laser dot is always keeping the most compact size, and then obtaining quite accurate dot instruction easily.
When green dot laser alignment is being used to make dot measurement at quite long work distance, it would be used at quite high power up 50mW to 100mW. At quite close distance, eye exposure might produce serious hurt to human eyes, thus it is very important issue for users to wear a pair of laser safety glasses so as to assure safe dot alignment all the time.

Nice Performing 532nm Glass Lens Green Dot Laser Alignment

What is your decision to get clear enough dot targeting at quite longer distance than your hand reaching? It is not an easy work for users to get required dot aligning accuracy until getting proper choice of 532nm glass lens green dot laser alignment. It is keeping quite bright green laser beam emission from its 532nm green DPSS laser part, owing to its middle wavelength among all visible laser spectrums, and extremely low laser beam divergence of less than 1mard, this green laser module is always effective enough to gain highly accurate and small size green reference dot targeting on all working surfaces.

The genuine use of 532nm green dot laser alignment is looking the same as a green laser pointer, however, once it is required to make long term continuous dot targeting, it is just becoming the only one choice to do so. This green laser module is just paying high attention to its environmental stabilization, owing to its equipment with DC input power supply, it is just able to get constant green reference dot targeting immediately. It is accepting long term continuous dot aligning work with equipped machine or device. However, once this laser diode module is working without disturbing, there is just no time of laser tube cooling down, which might decrease serving lifetime and easily cause laser diode burning out.

In practical dot aligning work, this 532nm glass lens green dot laser alignment is always getting the recommended working time of 8 to 10 hours a day. Under condition that users are making easy roast of laser beam aperture part, green laser beam can be temporarily focused, forming into a quite compact size green reference dot in use. It is not only workable for formal hand reaching, but also getting clear enough dot aligning at quite long distance and high lighting as well. In order to assure clear enough dot alignment all the time, this green laser module is just being used without sunlight exposure.

According to quite easy connect with a 3V or 4.2V DC input power supply, 532nm green dot laser alignment can easily get super bright green reference dot targeting on any working surfaces. The real dot aligning work always has no need to worry about any working environments, since noncontact green alignment laser dot is able to reach any hard reaching, long distance, high height and others etc. Anytime users are paying high attention to powerful green laser light, it is just necessary to wear professional 532nm wavelength preventing laser safety glasses until getting high security dot alignment safely.

 

4.2V DC Power Supply Green Dot Laser Alignment

When I am trying to make dot generation with high power green dot laser alignment, it always selects higher operating voltage DC power supply so as to fulfill bright and visible enough green reference dot projection on all desired working surfaces. According to 4.2V DC input power supply equipment, this advanced 532nm green laser module is always able to generate super bright and visible green reference dot efficiently. At the same time, high power green laser dot measuring tool is also workable under high lighting working environment, also sun lighting as well.

Green Dot Laser Alignment

Usually this higher operating voltage of 4.2V is workable on condition that the selecting output power of green dot laser alignment is range from 30mW to 100mW. On basis of 532nm green laser diode as its green beam emission source, the desired green dot laser source is always the most visible one among all. Once this high power green laser module is being equipped with glass cylindrical lens, the desired green laser dot just keeps its high beam concentricity, no change of laser dot size while laser dot targeting distance extends.
When users are selecting high power green dot laser alignment for industrial dot positioning work, it is extremely important to keep stable performance in continuous work. Inside the tube of 532nm green laser module, it adopts intellectual feedback constant current and power supply electric driving circuit board. Once the provided output power is much higher than actual need, this constant current PDB can make perfect protection of green laser diode from extremely powerful laser power. As a result, in order to make sure of the best performance in 24 hours operation, this advanced green dot laser diode module always makes sure of perfect protection of laser diode, thus ensuring its long serving lifetime of more than 8,000 hours.
In order to make sure of perfect performance in all industrial dot alignment work, such as laser marking machine, laser engraving machine, or button positioning, green alignment laser dot projection just keeps its stable dot projection, always no affect by surrounding working environment. At the same time, owing to its larger size laser tube with diameter of 26mm, this advanced 532nm green laser alignment just ensures its stable and reliable dot projection. Only if users are making proper control of dot targeting distance and proper dot targeting direction, this advanced alignment laser pointer just makes the best performance successfully.