Have you ever fallen into difficult to make extremely accurate dot positioning result at long working distance? Usually it is nearly impossible to obtain high level of dot generation with a common sticker. However, the appearance of red dot laser alignment has just solved the problem efficiently. This special red laser module consists of import 650nm red laser diode with qualified lens, constant current driving circuit board, it is just able to project quite bright, visible and highly rapid dot generation result on all targeting surfaces.
dot projecting red laser module
When you have a try of this industrial dot projecting laser alignment, you might find that it is just a correct choice to obtain high quality red laser dot on required working surfaces. It adopts import 650nm red laser diode as its red laser beam-emitting source. Besides its clearly visible red laser beam, it also keeps quite stable and reliable red laser dot generation in long term continuous dot generation work. During continuous dot projecting work, red dot is always very clear, bright and stable. With the red laser dot pointing time extending, the red laser light brightness will not become darker, dim or break.
In practical dot projecting working fields, working distance is extremely important. When red laser dot projecting distance is very long, the laser alignment is not able to make efficient enough alignment result. The laser beam fan angle has just made the projecting red laser dot not bright and visible at longer working distance. Whenever users want to make high quality red laser dot generation, users should try to make precise calculation and get the most proper selection of required red laser module.
According to exact working distance, surrounding environment, red dot projecting laser module always is just specially manufactured with different output power. But users can always get the most satisfied dot generation result at proper dot projecting distance range from 3 meters to 5 meters. With 1 meter working distance, red laser dot emitting from advanced alignment laser can be as fine as 1mm to 2mm. While it is pointed at 20 meters, red dot diameter can reach about 6mm to 8mm. Thus the maximum acceptable dot targeting distance should be controlled within 20 meters, or red laser alignment might not be efficient enough to obtain better align performance as expected.
On condition that users have made proper selection of output power and exact dot projecting working distance, this red dot projecting laser alignment will make quite efficient dot generation on desired working surfaces. Even on condition that mechanical power cannot reach required dot measuring result, the noncontact red laser dot emitting from this advanced alignment laser can just obtain the most satisfied dot projection efficiently.
alignmentlaser 